Emporia Product Guide

Residential and Commercial Home Battery System

DataSheet

Store energy from solar or the grid to power their home during outages or times of high-cost energy.

• Access to a 2.4GHz WiFi network.
  

Residential and Commercial V2X Bi-Directional Charger - Level 2 / 40A Electric Vehicle Charger.

Technical Specs
Spec Sheet PDF

Customers looking for Level 2 fast EV charging for their electric vehicles that can also be used to power their home with their car.

• Access to a 2.4GHz WiFi network.
  

Residential and Commercial EV Charger - Level 2 / 48A hardwired or NEMA 14-50P Electric Vehicle Charger.

Technical Specs
Spec Sheet PDF

Customers looking for Level 2 fast EV charging for their electric vehicles.

• Dual-pole, dedicated breaker at 60A+ for a 48A charge or 50A+ for a 40A charge
  
• Access to a 2.4GHz WiFi network.
  

Residential and Commercial EV Charger - Level 2 / 48A hardwired or NEMA 14-50P electric vehicle charger with access control

Technical Specs
Spec Sheet PDF

Managers of multi-family, workplaces, and fleets looking to provide access controlled Level 2 fast EV charging to their tenants, employees, guests and other regular drivers.

• Dual-pole, dedicated breaker at 60A+ for a 48A charge or 50A+ for a 40A charge
  
• Access to a 2.4GHz WiFi network.
  

Residential and Light Commercial Energy Monitor - An outlet-installed energy monitor that connects to ZigBee® Enabled Smart Meters in select markets.

Technical Specs
Spec Sheet PDF

Customers in Smart Meter markets seeking entry-level insight for electricity usage for their entire home / building.

• An AMI ZigBee® Enabled Smart Meter provided by your utility.
  
• A utility that allows ZigBee® connections to their Smart Meters.
  
• Access to a 2.4GHz WiFi network.
  

Residential Energy Monitor - Circuit panel-installed system including: One (1) Vue monitor and Two (2) 200A sensors

‍Technical Specs
Spec Sheet PDF

Residential customers seeking high-level insight for electricity usage and solar net metering for their entire home.

• 200A sensors must clamp around main leads (max diameter of 24 mm) inside main or sub panel
  
• The Wi-Fi antenna must extend outside the panel and have access to a 2.4GHz WiFi network.
  
• All other components may be housed either inside or outside the panel.
  

Light Commercial 3-phase Energy Monitor - Circuit panel-installed system including: One (1) Vue monitor and Three (3) 200A sensors
‍
Technical Specs
Spec Sheet PDF

Light commercial customers seeking high-level insight for electricity usage and solar net metering for their entire building.

• 200A sensors must clamp around main leads (max diameter of 24 mm) inside main or sub panel
  
• The Wi-Fi antenna must extend outside the panel and have access to a 2.4GHz WiFi network.
  
• All other components may be housed either inside or outside the panel.
  

Residential Energy Monitor - Circuit panel-installed system including: One (1) Vue monitor; Two (2) 200A sensors; and Eight(8) 50A sensors
‍
Technical Specs
Spec Sheet PDF

Residential customers seeking high-level insight for electricity usage and solar net metering for their entire home AND additional, specific usage or generation detail for eight (8) individual circuits.

• 200A sensors must clamp around main leads (max diameter of 24 mm) inside main or sub panel
  
• 50A sensors must clamp over wire leads in the panel for each circuit to be monitored.
  
• The Wi-Fi antenna must extend outside the panel and have access to a 2.4GHz WiFi network.
  
• All other components may be housed either inside or outside the panel.
  

Light Commercial 3-Phase Energy Monitor - Circuit panel-installed system including: One (1) Vue monitor; Three (3) 200A sensors; and Eight (8) 50A sensors
‍
Technical Specs
Spec Sheet PDF

Light commercial customers seeking high-level insight for electricity usage and solar net metering for their entire home AND additional, specific usage or generation detail for up to eight (8) individual circuits.

• 200A sensors must clamp around main leads (max diameter of 24 mm) inside main or sub panel
  
• 50A sensors must clamp over wire leads in the panel for each circuit to be monitored.
  
• The Wi-Fi antenna must extend outside the panel and have access to a 2.4GHz WiFi network.
  
• All other components may be housed either inside or outside the panel.
  

Residential Energy Monitor - Circuit panel-installed system including: One (1) Vue monitor; Two (2) 200A sensors; and Sixteen(16) 50A sensors
‍
Technical Specs
Spec Sheet PDF

Residential customers seeking high-level insight for electricity usage and solar net metering for their entire home AND additional, specific usage or generation detail for sixteen (16) individual circuits.

• 200A sensors must clamp around main leads (max diameter of 24 mm) inside main or sub panel
  
• 50A sensors must clamp over wire leads in the panel for each circuit to be monitored.
  
• The Wi-Fi antenna must extend outside the panel and have access to a 2.4GHz WiFi network.
  
• All other components may be housed either inside or outside the panel.
  

Light Commercial 3-Phase Energy Monitor - Circuit panel-installed system including: One (1) Vue monitor; Three (3) 200A sensors; and Sixteen (16) 50A sensors
‍
Technical Specs
Spec Sheet PDF

Light commercial customers seeking high-level insight for electricity usage and solar net metering for their entire home AND additional, specific usage or generation detail for up to sixteen (16) individual circuits.

• 200A sensors must clamp around main leads (max diameter of 24 mm) inside main or sub panel
  
• 50A sensors must clamp over wire leads in the panel for each circuit to be monitored.
  
• The Wi-Fi antenna must extend outside the panel and have access to a 2.4GHz WiFi network.
  
• All other components may be housed either inside or outside the panel.
  

Any Commercial or Residential application with 15A 3-prong outlets
‍
Technical Specs
Spec Sheet PDF

Customers looking to both control and monitor the energy use of individual small appliances and electronics.

• Max Power: 1800W @ 120V
  
• Max Load: 15A
  
• Must have access to a 2.4GHz WiFi network.
  

Energy Monitor Accessory - Pair of sensors to replace traditional Vue 200A CT Clamps
‍
Technical Specs

Customers who only have access to their mains via bus bar. Or customers with tight panels where a traditional 200A CT clamp will not fit.

For use only with a Gen 2 Vue. Does not work with Gen 1 Vues.

Light Commercial Energy Monitor Accessory - A single additional 200A sensor for the Vue monitor
‍
Technical Specs

Customers who need an additional sensor to monitor a third power phase and did not purchase a 3-phase Vue bundle. Typically, this requirement applies to light commercial and certain international customers.

A Gen 1 or Gen 2 Vue Whole Home monitor with or without an Expansion Module.